Cambo has introduced an upgrade solution so previous purchasers of the Cambo Actus camera platform for DLSR and Mirrorless systems can upgrade and use the new Fuji GFX.

The kit consists of a new rear standard, the bayonet holder with GFX bayonet and a front riser block to match  the height of the GFX body.

For photographers that wish to swap between their GFX cameras and DSLR and Mirrorless cameras there is the AC-78E rear bayonet mount.

The AC-78E is a great solution for fast swapping between the GFX and other camera systems. The rear bayonet can be unhooked, removed, and then replaced with the bayonet of your choice.

Contact your local Cambo dealer for price and availability.

Based on the knowledge used in our other Canon lens adapters, Cambo has now created an adapter to enable the use of Canon lenses on the new Fujifilm GFX 50s camera.
This adapter is mounted directly to the GFX camera bayonet and it controls the aperture of Canon lenses electronically, by similar controls as on the ACB-CA and WRE-CA.

Be aware that there is no further protocol to communicate with the GFX camera for setting aperture, autofocus or EXIF date from the lens.

It may be obvious that only Canon lenses that have a larger image circle, such as the T/S lenses, will have enough coverage for this sensor.

This combination makes it possible to use the new Fujifilm GFX camera with a 17mm (and 24mm) focal length that covers the full format of the Fuji’s 33x44mm sensor !!
Depending on the composition you may still be able to use the T/S movements on the lens itself, unobstructed.

Price and availability coming soon.

The ACTAR-24 is, like most wide-angle lenses, relatively sensitive for environmental light, direct as well as indirect light. For this, Cambo has developed a compendium lens hood, dedicated to this wide-angle lens.

The hood is flexible and self-supporting. It can be pulled out to 80mm extension and folded backward enough to clear the edges from vignetting when using movements.

The hood slips over the 100mm diameter of the front of the lens and attaches with one synthetic thumbscrew.

Basically, this lens hood is compatible with any lens with a front diameter of 100mm, which also includes the Rodenstock HR-W 32mm, as used in several combinations with other Cambo products.